A second hardware source is not a spare SKU on a shelf. It is a new model on another line, and it carries its own qualification. That single fact decides the project: the device does not transfer, but most of your files do. Your artwork, retail packaging, oil test record and acceptance standard can move. The model check and your own sample test cannot. Plan for a re-test, not a copy.
This page is for brands and fillers that already buy hardware and are deciding whether, and how, to add a second source without doubling the work.
Why a second source is not a spare part
Two devices can look alike and still be different engineering objects. The tank, the airway, the core and the battery are a system, built against a drawing and a set of parameters. When the supplier changes, the device changes, even if the drawing looks the same.
Quality is checked at two levels. Per model, once. Every new model goes through a three-stage quality check once, before we offer it: 100 units to a US lab, 200 units to partner brands for real-oil testing, and 500 units through channel trial sales. Once per model, not once per order. It is not repeated for the orders that follow. Per unit, every time. On the line, each unit goes through electrical testing before it moves on. Before shipment the order is checked against model, colour and quantity.
Both are true at once, and they answer different questions. The model check says the design is qualified. The per-unit test says this particular unit works today. A second source restarts the first clock and keeps the second one running. If that distinction is still fuzzy, read every unit is tested vs every model is qualified first.
What moves with you, and what does not
| Item | Moves to the second source? | Why |
|---|---|---|
| Your logo, colour and artwork files | Yes | They are your files, and they sit on the device surface |
| Your retail packaging and its supplier | Yes | Custom retail packaging is designed and produced by your own suppliers |
| Your oil test record | Yes, as context | It describes your oil, not the first device |
| Your acceptance standard | Yes | The criteria are yours, and both sources should be held to them |
| The spec sheet you froze | Yes, as a target | It is the brief the second source has to meet |
| The device itself | No | A different supplier builds a different object |
| The model qualification record | No | It belongs to the model that was qualified, not to your drawing |
| Battery documents | No, not as a copy | Paperwork is issued against the exact device and cell combination in the order |
The practical reading: your commercial files travel with you, the device does not. The work of a second source is specification and testing, not administration.
What has to be re-tested, and in what order
1. Your oil on their sample. A sample tested with a reference liquid proves the device is assembled, not that it works with your oil. Run the sample test with your own oil and record it against the same fields as the first source. Samples are 2-8 days; 5-7 days with paid logo printing; blank white-label hardware can go to your nominated forwarder in 2-3 days.
2. The four specification choices. Pore size with porosity as a pair, the intake, the voltage band, and the fill volume. They decide how a device behaves with your oil, and they are set per model. Do not assume the second device behaves like the first because the paper numbers match.
3. The leak and airflow check. Judge the draw every twenty draws and note where it changes. Stand the unit upright, then lay it on its side, and wipe the mouthpiece and the inlet at each step. Repeat them because the geometry is new.
4. The model check record. Ask what the supplier qualified and what the record says. On our side that is the three-stage check above, once per model. A second source with no model qualification story is a source with an unmeasured risk, however good the sample felt.
Running two sources without doubling the work
Six habits keep it manageable.
- One specification, one revision. Keep the same spec sheet fields for both sources and put the revision number on it: fill volume, resistance, voltage band, intake, and pore size with porosity as a pair.
- One acceptance standard. Write pass and fail criteria once, then apply them to both. If the standard changes for one source, it changes for both on the same date.
- One change log. Record the change, the part it touches, and who approved it. A change to artwork lands in your packaging supplier’s schedule; a change to the airway lands in tooling. The five gates of a custom hardware project show where each kind of change belongs.
- Separate carton marks. Both sources should mark cartons so the shipment can be checked against model, colour and quantity before it leaves, and so you can tell the two shipments apart.
- Documents per configuration. Battery shipments travel with UN38.3 test reports and an MSDS/SDS for the cell actually used, and the paperwork is issued against the exact device and cell combination in the order. Two configurations mean two document sets.
- One owner on your side. A named person who holds the spec, the acceptance standard and the change log.
Five things to put in writing before the first order
- The specification and its revision. Which fields, which values, which date.
- The qualification record. What the supplier will show you, and when.
- The per-unit test statement. What is tested on every unit, and what is checked against model, colour and quantity before shipment.
- The document package per configuration. Which battery documents are issued for the exact device and cell combination you are buying.
- Ownership of the drawing and the tooling made for it. On an OEM project where you bring the drawing, this is a contract term, so write it at the design stage.
When a second source is not worth it
A second source has a fixed cost: a sample round, your own test time, a qualification record to read, and a specification to keep aligned. For a small annual volume, that cost can be larger than the disruption it protects against. For a single short-life SKU, it usually is.
Separate the two reasons to add a source. One is continuity: you cannot afford a break in supply. The other is negotiating position: you want a comparable alternative. Continuity usually justifies the work. A negotiating position may not, if you never intend to place an order.
Above a certain volume the arithmetic flips. Two qualified sources with one specification give you a plan B you have actually tested, instead of a second supplier you have only emailed.
FAQ
Is a second source just a copy of my current hardware? No. A different supplier builds a different device, even when the drawing looks the same. It needs its own model qualification and its own sample test with your oil.
Can I reuse my sample test record from the first source? Use it as context, not as evidence. The record describes your oil, but the result belongs to the device you tested. Re-run the test on the second source’s sample and keep both records.
How long does qualifying a second source take? It depends on how many parts are new. Samples are 2-8 days, or 5-7 days with paid logo printing. Production for a standard order with custom branding is 20-25 days from written approval of the sample or artwork.
Can I split one order across two sources? That is your commercial decision. If you do, separate carton marks and per-configuration documents matter more, because each configuration has its own battery document set.
Do both sources need the same documents? Each configuration has its own document set. Battery paperwork is issued against the exact device and cell combination in the order, so treat the two sources as two configurations unless you have confirmed otherwise.
Send the model and the oil you are second-sourcing
Tell us which model you are replacing or adding to, how your oil behaves and what volume you expect, and we will tell you which re-test applies and what we can show you from a model check. Scope: empty vape hardware only. We do not supply, fill or sell oil, nicotine or e-liquid.
Send it through the quote form or by email to Mandy@pulsecig.com. You will get a reply within one business day with pricing, MOQ and a production schedule. Where a second source needs a configuration change, we will say so before you commit, not after.